Purpose: Transferring photo prints onto a ground.
Composition: Acrylic resin dispersion

Qualities:
• Only suitable for laser printer and photocopies
• Prepare the paper on the print side with Amsterdam photo transfer gel, then press the print side on the ground and rub away any air from under the print
• Leave to dry for at least 24 hours
• When dry, remove the paper by carefully rubbing it using a brush and water or a moist cloth
• Can be painted over with acrylic paint
• For an optimal end result apply an acrylic medium or a varnish
• Waterproof when dry
• Use at temperatures above 10° C
• Store frost-free

Available in 500 ml.

Purpose: Provides a glowing effect in the dark.
Composition: Acrylic resin dispersion, phosphorescent pigment

Qualities:
• To be applied preferably as the final layer on the work for optimal results
• Afterglow time greatly depends on the light source and time of exposure to the light
• Mixing with other colors will greatly reduce the glow effect
• Best applied on white white grounds
• Waterproof when dry
• Use at temperatures above 10° C
• Store frost-free
• Clean utensils with water

Available in 500 ml

Purpose: Making fine grain and relief.
Composition: Acrylic resin dispersion, finely ground pumice

Qualities:
• Can be applied directly or mixed with acrylic paint
• Can be painted over with acrylic paint
• Can be applied in thick layers
• When drying it can be worked on by, for example, cutting and folding
• Waterproof when dry
• Use at temperatures above 10° C
• Store frost-free

Available in 250 ml and 500 ml